By A Mystery Man Writer
Adafruit Industries, Unique & fun DIY electronics and kits Rugged Metal Pushbutton with Blue LED Ring [16mm Blue Momentary] : ID 481 - These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button
These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a blue plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the blue LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA.
U16F1B Momentary Push Button Switch Black Metal Shell with Blue LED Ring Suitable for 16mm Hole, 16mm, Products
Blue 16mm Metal Push Button Switch Latching 12V-24V Ring LED Light + Connector
SPDT Latching 16mm Stainless Steel Tamper/Waterproof Raised Push Button Switch with Blue Ring
PV6F240SS-341 Anti Vandal Push Button Switch, 16 mm, Illuminated Blue Ring, Momentary Off-On
Rugged Metal On/Off Switch with Green LED Ring - 16mm Green On&Off Who
LED Illuminated Pushbutton - 30mm Square
Rugged Metal Pushbutton - 16mm 6V RGB Momentary
Rugged Metal On/Off Switch with Red LED Ring [16mm Red On/Off] : ID 916 : Adafruit Industries, Unique & fun DIY electronics and kits
QITA Rugged Metal Pushbutton with Blue LED Ring - 16mm Blue Momentary, 3,49 €
Rugged Metal Pushbutton with Red LED Ring